download
Checking the electric starter motor for wear -Check Bendix 1 for smooth operation and signs of wear. -Check the sprocket of the electric starter for wear and radial clearance. -Replace O-ring 2 of the electric starter. -Replace gasket 3 . -Check starter idler gear 4 for smooth operation and wear, check that the bearing bushings are seated firmly. Electric starter motor – checking for and adjusting play -Mount the electric starter and the starter idler gear. -Mount the tighten cover 5 . -Move starter idler gear 4 back and forth in the direction of rotation, the maximum play may not exceed half the width of a tooth. -If play is larger, cover 5 must be removed and as many shims 6 with a thickness of 0.10 mm as necessary must be added to eliminate all play. Then remove one shim again. -Check the play again; the maximum play may not exceed more than half of the width of a tooth. 1 2 3 4 5 4 5 6
Incoming search terms:
- Repair Starter Bendix Diagram
- manual mitsuba sm-13
- 2001 sportster starter removal
- WF250-Q2
- ultima starter review
- Big Dog Starter Replacement
- bendix-starter-drive-repair-diagram
- howtochangeastarteron aindianchiefmotorcycle
- outside dia of brush holder plate on 2001 mitsuba starter
- 93 klx 650c motorcycle starter removal
